Stopping power of mountain vs road bikeHow long should a road tyre hold its pressure?What bicycle design factors affect stopping power?Road bikes rim brake or disc brakeAre road brakes designed not to brake too much?Brakes feel like they are not even there on my used road bike. How can I fix it?Can I install caliper or cantilever brakes on a frame and set of wheels designed for disc brakes?Are all side-pull road bicycle brakes compatible?Apollo XC26 mountain bike, convert it to a coaster brake fixie?My bike brakes are lethal, help!Should V brakes be able to lock the front wheel?
Why doesn't H₄O²⁺ exist?
In Romance of the Three Kingdoms why do people still use bamboo sticks when papers are already invented?
Can a virus destroy the BIOS of a modern computer?
What does it mean to describe someone as a butt steak?
RG-213 Cable with electric strained wire as metallic shield of Coaxial cable
What's the point of deactivating Num Lock on login screens?
intersection of two sorted vectors in C++
Why can't we play rap on piano?
What is the word for reserving something for yourself before others do?
Does a druid starting with a bow start with no arrows?
Etiquette around loan refinance - decision is going to cost first broker a lot of money
What killed these X2 caps?
If human space travel is limited by the G force vulnerability, is there a way to counter G forces?
Can I ask the recruiters in my resume to put the reason why I am rejected?
Should I tell management that I intend to leave due to bad software development practices?
How can I make my BBEG immortal short of making them a Lich or Vampire?
Western buddy movie with a supernatural twist where a woman turns into an eagle at the end
A reference to a well-known characterization of scattered compact spaces
Arrow those variables!
Can one be a co-translator of a book, if he does not know the language that the book is translated into?
UK: Is there precedent for the governments e-petition site changing the direction of a government decision?
Fully-Firstable Anagram Sets
Why does Kotter return in Welcome Back Kotter
Took a trip to a parallel universe, need help deciphering
Stopping power of mountain vs road bike
How long should a road tyre hold its pressure?What bicycle design factors affect stopping power?Road bikes rim brake or disc brakeAre road brakes designed not to brake too much?Brakes feel like they are not even there on my used road bike. How can I fix it?Can I install caliper or cantilever brakes on a frame and set of wheels designed for disc brakes?Are all side-pull road bicycle brakes compatible?Apollo XC26 mountain bike, convert it to a coaster brake fixie?My bike brakes are lethal, help!Should V brakes be able to lock the front wheel?
I have recently been restoring a Btwin Triban-500 road bike, given to me from a friend who had let it sit around for a few years. I've rebuilt the bike sparing no expense, new tyres, inner tubes, cables, levers, chain, cassette and everything else has been thoroughly cleaned (with dish detergent, degreaser and re-greased).
It's been a fun project and I've currently got the brakes and rear derailleur connected. I've taken the bike for a spin around the block and I'm not happy with the braking power. I've got the brake cables tight and the pads are adjusted (i've done the same on my V-brake cheapo mountain bike and that stops quickly!). When I slam the brakes on the wheels lock up(front and back) but I take longer to stop than I'm perhaps used to. I mentioned my cheap mountain bike and those brakes are sharp (despite being cheap V-brakes). I've previously owned a hybrid with hydraulic discs and even half the lever was enough to violently throw me over the bars, I strive for brakes that powerful!
In comparison to my mountain bike, I'd say I take an extra half second to stop (I did a very scientific test past a street lamp). It worries me because the mountain bike is one of the cheapest rubbishest bikes from Halfords, surely the road should stop before it?
The mountain has 1.95 wide tyres and the road has 23mm tyres, will the reduced rubber be making a big impact (less friction) stopping the bike? or should I be able to get the rim brakes to perform just as well as the cantilevers?
Thanks
brakes maintenance rim-brake
New contributor
|
show 5 more comments
I have recently been restoring a Btwin Triban-500 road bike, given to me from a friend who had let it sit around for a few years. I've rebuilt the bike sparing no expense, new tyres, inner tubes, cables, levers, chain, cassette and everything else has been thoroughly cleaned (with dish detergent, degreaser and re-greased).
It's been a fun project and I've currently got the brakes and rear derailleur connected. I've taken the bike for a spin around the block and I'm not happy with the braking power. I've got the brake cables tight and the pads are adjusted (i've done the same on my V-brake cheapo mountain bike and that stops quickly!). When I slam the brakes on the wheels lock up(front and back) but I take longer to stop than I'm perhaps used to. I mentioned my cheap mountain bike and those brakes are sharp (despite being cheap V-brakes). I've previously owned a hybrid with hydraulic discs and even half the lever was enough to violently throw me over the bars, I strive for brakes that powerful!
In comparison to my mountain bike, I'd say I take an extra half second to stop (I did a very scientific test past a street lamp). It worries me because the mountain bike is one of the cheapest rubbishest bikes from Halfords, surely the road should stop before it?
The mountain has 1.95 wide tyres and the road has 23mm tyres, will the reduced rubber be making a big impact (less friction) stopping the bike? or should I be able to get the rim brakes to perform just as well as the cantilevers?
Thanks
brakes maintenance rim-brake
New contributor
3
I don't understand. You say "I've currently got the brakes and rear derailleur connected", which strongly suggests that the front brakes aren't connected. That, right there, would explain your bad braking performance, since something like 70% of the braking power comes from the front wheel. But then you claim that you're locking up the front wheel while braking. Regardless of what brakes are connected, that's suspect, since a locked front wheel almost always throws you off the bike. So what's going on?
– David Richerby
11 hours ago
3
Indeed, in my experience a locked front wheel almost always requires a change of underwear :)
– Andy P
11 hours ago
6
@AndyP You shouldn't wear underwear with your cycling shorts! ;-) (Or maybe you should, since a change of underwear is much cheaper than a change of shorts.)
– David Richerby
11 hours ago
1
Have you replaced the brake rubbers? Old one may become hard and lose stopping power. Have you degreased the rims? From sitting around they may have gathered greasy dust, especially while stored in a garage.
– Carel
10 hours ago
1
Just to clarify: Are you really able to make the front wheel lock and skid on dry tarmac? Then the brakes are fine but the tires are rubbish.
– Michael
5 hours ago
|
show 5 more comments
I have recently been restoring a Btwin Triban-500 road bike, given to me from a friend who had let it sit around for a few years. I've rebuilt the bike sparing no expense, new tyres, inner tubes, cables, levers, chain, cassette and everything else has been thoroughly cleaned (with dish detergent, degreaser and re-greased).
It's been a fun project and I've currently got the brakes and rear derailleur connected. I've taken the bike for a spin around the block and I'm not happy with the braking power. I've got the brake cables tight and the pads are adjusted (i've done the same on my V-brake cheapo mountain bike and that stops quickly!). When I slam the brakes on the wheels lock up(front and back) but I take longer to stop than I'm perhaps used to. I mentioned my cheap mountain bike and those brakes are sharp (despite being cheap V-brakes). I've previously owned a hybrid with hydraulic discs and even half the lever was enough to violently throw me over the bars, I strive for brakes that powerful!
In comparison to my mountain bike, I'd say I take an extra half second to stop (I did a very scientific test past a street lamp). It worries me because the mountain bike is one of the cheapest rubbishest bikes from Halfords, surely the road should stop before it?
The mountain has 1.95 wide tyres and the road has 23mm tyres, will the reduced rubber be making a big impact (less friction) stopping the bike? or should I be able to get the rim brakes to perform just as well as the cantilevers?
Thanks
brakes maintenance rim-brake
New contributor
I have recently been restoring a Btwin Triban-500 road bike, given to me from a friend who had let it sit around for a few years. I've rebuilt the bike sparing no expense, new tyres, inner tubes, cables, levers, chain, cassette and everything else has been thoroughly cleaned (with dish detergent, degreaser and re-greased).
It's been a fun project and I've currently got the brakes and rear derailleur connected. I've taken the bike for a spin around the block and I'm not happy with the braking power. I've got the brake cables tight and the pads are adjusted (i've done the same on my V-brake cheapo mountain bike and that stops quickly!). When I slam the brakes on the wheels lock up(front and back) but I take longer to stop than I'm perhaps used to. I mentioned my cheap mountain bike and those brakes are sharp (despite being cheap V-brakes). I've previously owned a hybrid with hydraulic discs and even half the lever was enough to violently throw me over the bars, I strive for brakes that powerful!
In comparison to my mountain bike, I'd say I take an extra half second to stop (I did a very scientific test past a street lamp). It worries me because the mountain bike is one of the cheapest rubbishest bikes from Halfords, surely the road should stop before it?
The mountain has 1.95 wide tyres and the road has 23mm tyres, will the reduced rubber be making a big impact (less friction) stopping the bike? or should I be able to get the rim brakes to perform just as well as the cantilevers?
Thanks
brakes maintenance rim-brake
brakes maintenance rim-brake
New contributor
New contributor
edited 11 hours ago
Argenti Apparatus
37k23891
37k23891
New contributor
asked 12 hours ago
AxemastaAxemasta
1063
1063
New contributor
New contributor
3
I don't understand. You say "I've currently got the brakes and rear derailleur connected", which strongly suggests that the front brakes aren't connected. That, right there, would explain your bad braking performance, since something like 70% of the braking power comes from the front wheel. But then you claim that you're locking up the front wheel while braking. Regardless of what brakes are connected, that's suspect, since a locked front wheel almost always throws you off the bike. So what's going on?
– David Richerby
11 hours ago
3
Indeed, in my experience a locked front wheel almost always requires a change of underwear :)
– Andy P
11 hours ago
6
@AndyP You shouldn't wear underwear with your cycling shorts! ;-) (Or maybe you should, since a change of underwear is much cheaper than a change of shorts.)
– David Richerby
11 hours ago
1
Have you replaced the brake rubbers? Old one may become hard and lose stopping power. Have you degreased the rims? From sitting around they may have gathered greasy dust, especially while stored in a garage.
– Carel
10 hours ago
1
Just to clarify: Are you really able to make the front wheel lock and skid on dry tarmac? Then the brakes are fine but the tires are rubbish.
– Michael
5 hours ago
|
show 5 more comments
3
I don't understand. You say "I've currently got the brakes and rear derailleur connected", which strongly suggests that the front brakes aren't connected. That, right there, would explain your bad braking performance, since something like 70% of the braking power comes from the front wheel. But then you claim that you're locking up the front wheel while braking. Regardless of what brakes are connected, that's suspect, since a locked front wheel almost always throws you off the bike. So what's going on?
– David Richerby
11 hours ago
3
Indeed, in my experience a locked front wheel almost always requires a change of underwear :)
– Andy P
11 hours ago
6
@AndyP You shouldn't wear underwear with your cycling shorts! ;-) (Or maybe you should, since a change of underwear is much cheaper than a change of shorts.)
– David Richerby
11 hours ago
1
Have you replaced the brake rubbers? Old one may become hard and lose stopping power. Have you degreased the rims? From sitting around they may have gathered greasy dust, especially while stored in a garage.
– Carel
10 hours ago
1
Just to clarify: Are you really able to make the front wheel lock and skid on dry tarmac? Then the brakes are fine but the tires are rubbish.
– Michael
5 hours ago
3
3
I don't understand. You say "I've currently got the brakes and rear derailleur connected", which strongly suggests that the front brakes aren't connected. That, right there, would explain your bad braking performance, since something like 70% of the braking power comes from the front wheel. But then you claim that you're locking up the front wheel while braking. Regardless of what brakes are connected, that's suspect, since a locked front wheel almost always throws you off the bike. So what's going on?
– David Richerby
11 hours ago
I don't understand. You say "I've currently got the brakes and rear derailleur connected", which strongly suggests that the front brakes aren't connected. That, right there, would explain your bad braking performance, since something like 70% of the braking power comes from the front wheel. But then you claim that you're locking up the front wheel while braking. Regardless of what brakes are connected, that's suspect, since a locked front wheel almost always throws you off the bike. So what's going on?
– David Richerby
11 hours ago
3
3
Indeed, in my experience a locked front wheel almost always requires a change of underwear :)
– Andy P
11 hours ago
Indeed, in my experience a locked front wheel almost always requires a change of underwear :)
– Andy P
11 hours ago
6
6
@AndyP You shouldn't wear underwear with your cycling shorts! ;-) (Or maybe you should, since a change of underwear is much cheaper than a change of shorts.)
– David Richerby
11 hours ago
@AndyP You shouldn't wear underwear with your cycling shorts! ;-) (Or maybe you should, since a change of underwear is much cheaper than a change of shorts.)
– David Richerby
11 hours ago
1
1
Have you replaced the brake rubbers? Old one may become hard and lose stopping power. Have you degreased the rims? From sitting around they may have gathered greasy dust, especially while stored in a garage.
– Carel
10 hours ago
Have you replaced the brake rubbers? Old one may become hard and lose stopping power. Have you degreased the rims? From sitting around they may have gathered greasy dust, especially while stored in a garage.
– Carel
10 hours ago
1
1
Just to clarify: Are you really able to make the front wheel lock and skid on dry tarmac? Then the brakes are fine but the tires are rubbish.
– Michael
5 hours ago
Just to clarify: Are you really able to make the front wheel lock and skid on dry tarmac? Then the brakes are fine but the tires are rubbish.
– Michael
5 hours ago
|
show 5 more comments
3 Answers
3
active
oldest
votes
You have already answered your own question really.
When I slam the brakes on the wheels lock up(front and back) but i take longer to stop than i'm perhaps used to.
If the brakes are strong enough to lock up the wheels they have plenty of power, but you have overcome the ability of the tyre to grip the road.
1
Do you think upgrading the tyres would be a good shout? I'm a little worried about the bikes ability to stop fast in traffic!
– Axemasta
12 hours ago
2
I think upgrading the tyres to the very best you can afford is always a good shout on any bike. Tyres very much define how your bike performs. Tyres are responsible for grip (cornering and braking), rolling resistance, ride 'feel' and puncture resistance.
– Andy P
11 hours ago
4
Some tires come with a thick wax coating and have full grip after the wax has worn away. Is suspect yours are one of these, because on a road bike you usually lift the rear wheel before locking front. Just do some riding to break them in.
– ojs
10 hours ago
1
@ojs Good thinking, I hadn't thought of that. I always rub that stuff off by hand before use.
– Andy P
10 hours ago
2
Noting of course that "best" is a function of many variables when it comes to tyres
– Chris H
5 hours ago
|
show 4 more comments
The maximum braking force is achieved when the tire is just about to loose traction and start sliding on the road surface. Braking force decreases sharply as the tire begins to slide.
If you are locking both wheels, you are not getting maximum braking force, so try to modulate the force you are putting on the levers so that the wheels do not lock up. You should be able to apply more force on the front brake lever as the deceleration of your mass pushes the front tire against the road harder, making it more difficult to lock that wheel.
Also be aware that the 23mm road tires have a much smaller contact patch and therefore less grip. Higher tire pressure reduces the contact patch size, so you could try a lower tire pressure.
Ok thankyou, I'm running 100psi at the moment, I'll try 80 tonight
– Axemasta
11 hours ago
1
@Axemasta I get pinch flats on my 25mm tyres if I let the pressure get down to 80psi. Unless you're lighter than me (~73 kg), I wouldn't go below 90psi on 23mm tyres.
– David Richerby
10 hours ago
@DavidRicherby risk of pinch flats depends on the surface as well as pressure and rider mass.
– Argenti Apparatus
9 hours ago
@ArgentiApparatus I ride in the UK; any ride is going to include sections of road that are rough enough to risk pinch flats, so "surface" isn't really a variable for me. :(
– David Richerby
8 hours ago
1
@Michael while true to a first approximation, track bikes don't have brakes and roads are neither smooth nor clean enough in general for that statement to be particularly relevant
– Chris H
5 hours ago
|
show 4 more comments
A review I read says the brake calipers are own-brand and describes them as "basic" and "average". Possibly an upgrade there would help, but you'd have to decide if it's really worth spending that much money on a second-hand bike that only cost about £350 new.
1
Ok thats good to know. I got the bike for free and I'm restoring it as a personal project for a bit of fun. I've already spent money on many new components, I can pickup some second hand Tiagra brakes for pretty cheap so I think I'll do that!
– Axemasta
11 hours ago
3
If OP is actually able to lock the front wheel then the current brakes are strong enough.
– Michael
5 hours ago
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "126"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Axemasta is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f60137%2fstopping-power-of-mountain-vs-road-bike%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
You have already answered your own question really.
When I slam the brakes on the wheels lock up(front and back) but i take longer to stop than i'm perhaps used to.
If the brakes are strong enough to lock up the wheels they have plenty of power, but you have overcome the ability of the tyre to grip the road.
1
Do you think upgrading the tyres would be a good shout? I'm a little worried about the bikes ability to stop fast in traffic!
– Axemasta
12 hours ago
2
I think upgrading the tyres to the very best you can afford is always a good shout on any bike. Tyres very much define how your bike performs. Tyres are responsible for grip (cornering and braking), rolling resistance, ride 'feel' and puncture resistance.
– Andy P
11 hours ago
4
Some tires come with a thick wax coating and have full grip after the wax has worn away. Is suspect yours are one of these, because on a road bike you usually lift the rear wheel before locking front. Just do some riding to break them in.
– ojs
10 hours ago
1
@ojs Good thinking, I hadn't thought of that. I always rub that stuff off by hand before use.
– Andy P
10 hours ago
2
Noting of course that "best" is a function of many variables when it comes to tyres
– Chris H
5 hours ago
|
show 4 more comments
You have already answered your own question really.
When I slam the brakes on the wheels lock up(front and back) but i take longer to stop than i'm perhaps used to.
If the brakes are strong enough to lock up the wheels they have plenty of power, but you have overcome the ability of the tyre to grip the road.
1
Do you think upgrading the tyres would be a good shout? I'm a little worried about the bikes ability to stop fast in traffic!
– Axemasta
12 hours ago
2
I think upgrading the tyres to the very best you can afford is always a good shout on any bike. Tyres very much define how your bike performs. Tyres are responsible for grip (cornering and braking), rolling resistance, ride 'feel' and puncture resistance.
– Andy P
11 hours ago
4
Some tires come with a thick wax coating and have full grip after the wax has worn away. Is suspect yours are one of these, because on a road bike you usually lift the rear wheel before locking front. Just do some riding to break them in.
– ojs
10 hours ago
1
@ojs Good thinking, I hadn't thought of that. I always rub that stuff off by hand before use.
– Andy P
10 hours ago
2
Noting of course that "best" is a function of many variables when it comes to tyres
– Chris H
5 hours ago
|
show 4 more comments
You have already answered your own question really.
When I slam the brakes on the wheels lock up(front and back) but i take longer to stop than i'm perhaps used to.
If the brakes are strong enough to lock up the wheels they have plenty of power, but you have overcome the ability of the tyre to grip the road.
You have already answered your own question really.
When I slam the brakes on the wheels lock up(front and back) but i take longer to stop than i'm perhaps used to.
If the brakes are strong enough to lock up the wheels they have plenty of power, but you have overcome the ability of the tyre to grip the road.
answered 12 hours ago
Andy PAndy P
4,419918
4,419918
1
Do you think upgrading the tyres would be a good shout? I'm a little worried about the bikes ability to stop fast in traffic!
– Axemasta
12 hours ago
2
I think upgrading the tyres to the very best you can afford is always a good shout on any bike. Tyres very much define how your bike performs. Tyres are responsible for grip (cornering and braking), rolling resistance, ride 'feel' and puncture resistance.
– Andy P
11 hours ago
4
Some tires come with a thick wax coating and have full grip after the wax has worn away. Is suspect yours are one of these, because on a road bike you usually lift the rear wheel before locking front. Just do some riding to break them in.
– ojs
10 hours ago
1
@ojs Good thinking, I hadn't thought of that. I always rub that stuff off by hand before use.
– Andy P
10 hours ago
2
Noting of course that "best" is a function of many variables when it comes to tyres
– Chris H
5 hours ago
|
show 4 more comments
1
Do you think upgrading the tyres would be a good shout? I'm a little worried about the bikes ability to stop fast in traffic!
– Axemasta
12 hours ago
2
I think upgrading the tyres to the very best you can afford is always a good shout on any bike. Tyres very much define how your bike performs. Tyres are responsible for grip (cornering and braking), rolling resistance, ride 'feel' and puncture resistance.
– Andy P
11 hours ago
4
Some tires come with a thick wax coating and have full grip after the wax has worn away. Is suspect yours are one of these, because on a road bike you usually lift the rear wheel before locking front. Just do some riding to break them in.
– ojs
10 hours ago
1
@ojs Good thinking, I hadn't thought of that. I always rub that stuff off by hand before use.
– Andy P
10 hours ago
2
Noting of course that "best" is a function of many variables when it comes to tyres
– Chris H
5 hours ago
1
1
Do you think upgrading the tyres would be a good shout? I'm a little worried about the bikes ability to stop fast in traffic!
– Axemasta
12 hours ago
Do you think upgrading the tyres would be a good shout? I'm a little worried about the bikes ability to stop fast in traffic!
– Axemasta
12 hours ago
2
2
I think upgrading the tyres to the very best you can afford is always a good shout on any bike. Tyres very much define how your bike performs. Tyres are responsible for grip (cornering and braking), rolling resistance, ride 'feel' and puncture resistance.
– Andy P
11 hours ago
I think upgrading the tyres to the very best you can afford is always a good shout on any bike. Tyres very much define how your bike performs. Tyres are responsible for grip (cornering and braking), rolling resistance, ride 'feel' and puncture resistance.
– Andy P
11 hours ago
4
4
Some tires come with a thick wax coating and have full grip after the wax has worn away. Is suspect yours are one of these, because on a road bike you usually lift the rear wheel before locking front. Just do some riding to break them in.
– ojs
10 hours ago
Some tires come with a thick wax coating and have full grip after the wax has worn away. Is suspect yours are one of these, because on a road bike you usually lift the rear wheel before locking front. Just do some riding to break them in.
– ojs
10 hours ago
1
1
@ojs Good thinking, I hadn't thought of that. I always rub that stuff off by hand before use.
– Andy P
10 hours ago
@ojs Good thinking, I hadn't thought of that. I always rub that stuff off by hand before use.
– Andy P
10 hours ago
2
2
Noting of course that "best" is a function of many variables when it comes to tyres
– Chris H
5 hours ago
Noting of course that "best" is a function of many variables when it comes to tyres
– Chris H
5 hours ago
|
show 4 more comments
The maximum braking force is achieved when the tire is just about to loose traction and start sliding on the road surface. Braking force decreases sharply as the tire begins to slide.
If you are locking both wheels, you are not getting maximum braking force, so try to modulate the force you are putting on the levers so that the wheels do not lock up. You should be able to apply more force on the front brake lever as the deceleration of your mass pushes the front tire against the road harder, making it more difficult to lock that wheel.
Also be aware that the 23mm road tires have a much smaller contact patch and therefore less grip. Higher tire pressure reduces the contact patch size, so you could try a lower tire pressure.
Ok thankyou, I'm running 100psi at the moment, I'll try 80 tonight
– Axemasta
11 hours ago
1
@Axemasta I get pinch flats on my 25mm tyres if I let the pressure get down to 80psi. Unless you're lighter than me (~73 kg), I wouldn't go below 90psi on 23mm tyres.
– David Richerby
10 hours ago
@DavidRicherby risk of pinch flats depends on the surface as well as pressure and rider mass.
– Argenti Apparatus
9 hours ago
@ArgentiApparatus I ride in the UK; any ride is going to include sections of road that are rough enough to risk pinch flats, so "surface" isn't really a variable for me. :(
– David Richerby
8 hours ago
1
@Michael while true to a first approximation, track bikes don't have brakes and roads are neither smooth nor clean enough in general for that statement to be particularly relevant
– Chris H
5 hours ago
|
show 4 more comments
The maximum braking force is achieved when the tire is just about to loose traction and start sliding on the road surface. Braking force decreases sharply as the tire begins to slide.
If you are locking both wheels, you are not getting maximum braking force, so try to modulate the force you are putting on the levers so that the wheels do not lock up. You should be able to apply more force on the front brake lever as the deceleration of your mass pushes the front tire against the road harder, making it more difficult to lock that wheel.
Also be aware that the 23mm road tires have a much smaller contact patch and therefore less grip. Higher tire pressure reduces the contact patch size, so you could try a lower tire pressure.
Ok thankyou, I'm running 100psi at the moment, I'll try 80 tonight
– Axemasta
11 hours ago
1
@Axemasta I get pinch flats on my 25mm tyres if I let the pressure get down to 80psi. Unless you're lighter than me (~73 kg), I wouldn't go below 90psi on 23mm tyres.
– David Richerby
10 hours ago
@DavidRicherby risk of pinch flats depends on the surface as well as pressure and rider mass.
– Argenti Apparatus
9 hours ago
@ArgentiApparatus I ride in the UK; any ride is going to include sections of road that are rough enough to risk pinch flats, so "surface" isn't really a variable for me. :(
– David Richerby
8 hours ago
1
@Michael while true to a first approximation, track bikes don't have brakes and roads are neither smooth nor clean enough in general for that statement to be particularly relevant
– Chris H
5 hours ago
|
show 4 more comments
The maximum braking force is achieved when the tire is just about to loose traction and start sliding on the road surface. Braking force decreases sharply as the tire begins to slide.
If you are locking both wheels, you are not getting maximum braking force, so try to modulate the force you are putting on the levers so that the wheels do not lock up. You should be able to apply more force on the front brake lever as the deceleration of your mass pushes the front tire against the road harder, making it more difficult to lock that wheel.
Also be aware that the 23mm road tires have a much smaller contact patch and therefore less grip. Higher tire pressure reduces the contact patch size, so you could try a lower tire pressure.
The maximum braking force is achieved when the tire is just about to loose traction and start sliding on the road surface. Braking force decreases sharply as the tire begins to slide.
If you are locking both wheels, you are not getting maximum braking force, so try to modulate the force you are putting on the levers so that the wheels do not lock up. You should be able to apply more force on the front brake lever as the deceleration of your mass pushes the front tire against the road harder, making it more difficult to lock that wheel.
Also be aware that the 23mm road tires have a much smaller contact patch and therefore less grip. Higher tire pressure reduces the contact patch size, so you could try a lower tire pressure.
edited 6 hours ago
answered 11 hours ago
Argenti ApparatusArgenti Apparatus
37k23891
37k23891
Ok thankyou, I'm running 100psi at the moment, I'll try 80 tonight
– Axemasta
11 hours ago
1
@Axemasta I get pinch flats on my 25mm tyres if I let the pressure get down to 80psi. Unless you're lighter than me (~73 kg), I wouldn't go below 90psi on 23mm tyres.
– David Richerby
10 hours ago
@DavidRicherby risk of pinch flats depends on the surface as well as pressure and rider mass.
– Argenti Apparatus
9 hours ago
@ArgentiApparatus I ride in the UK; any ride is going to include sections of road that are rough enough to risk pinch flats, so "surface" isn't really a variable for me. :(
– David Richerby
8 hours ago
1
@Michael while true to a first approximation, track bikes don't have brakes and roads are neither smooth nor clean enough in general for that statement to be particularly relevant
– Chris H
5 hours ago
|
show 4 more comments
Ok thankyou, I'm running 100psi at the moment, I'll try 80 tonight
– Axemasta
11 hours ago
1
@Axemasta I get pinch flats on my 25mm tyres if I let the pressure get down to 80psi. Unless you're lighter than me (~73 kg), I wouldn't go below 90psi on 23mm tyres.
– David Richerby
10 hours ago
@DavidRicherby risk of pinch flats depends on the surface as well as pressure and rider mass.
– Argenti Apparatus
9 hours ago
@ArgentiApparatus I ride in the UK; any ride is going to include sections of road that are rough enough to risk pinch flats, so "surface" isn't really a variable for me. :(
– David Richerby
8 hours ago
1
@Michael while true to a first approximation, track bikes don't have brakes and roads are neither smooth nor clean enough in general for that statement to be particularly relevant
– Chris H
5 hours ago
Ok thankyou, I'm running 100psi at the moment, I'll try 80 tonight
– Axemasta
11 hours ago
Ok thankyou, I'm running 100psi at the moment, I'll try 80 tonight
– Axemasta
11 hours ago
1
1
@Axemasta I get pinch flats on my 25mm tyres if I let the pressure get down to 80psi. Unless you're lighter than me (~73 kg), I wouldn't go below 90psi on 23mm tyres.
– David Richerby
10 hours ago
@Axemasta I get pinch flats on my 25mm tyres if I let the pressure get down to 80psi. Unless you're lighter than me (~73 kg), I wouldn't go below 90psi on 23mm tyres.
– David Richerby
10 hours ago
@DavidRicherby risk of pinch flats depends on the surface as well as pressure and rider mass.
– Argenti Apparatus
9 hours ago
@DavidRicherby risk of pinch flats depends on the surface as well as pressure and rider mass.
– Argenti Apparatus
9 hours ago
@ArgentiApparatus I ride in the UK; any ride is going to include sections of road that are rough enough to risk pinch flats, so "surface" isn't really a variable for me. :(
– David Richerby
8 hours ago
@ArgentiApparatus I ride in the UK; any ride is going to include sections of road that are rough enough to risk pinch flats, so "surface" isn't really a variable for me. :(
– David Richerby
8 hours ago
1
1
@Michael while true to a first approximation, track bikes don't have brakes and roads are neither smooth nor clean enough in general for that statement to be particularly relevant
– Chris H
5 hours ago
@Michael while true to a first approximation, track bikes don't have brakes and roads are neither smooth nor clean enough in general for that statement to be particularly relevant
– Chris H
5 hours ago
|
show 4 more comments
A review I read says the brake calipers are own-brand and describes them as "basic" and "average". Possibly an upgrade there would help, but you'd have to decide if it's really worth spending that much money on a second-hand bike that only cost about £350 new.
1
Ok thats good to know. I got the bike for free and I'm restoring it as a personal project for a bit of fun. I've already spent money on many new components, I can pickup some second hand Tiagra brakes for pretty cheap so I think I'll do that!
– Axemasta
11 hours ago
3
If OP is actually able to lock the front wheel then the current brakes are strong enough.
– Michael
5 hours ago
add a comment |
A review I read says the brake calipers are own-brand and describes them as "basic" and "average". Possibly an upgrade there would help, but you'd have to decide if it's really worth spending that much money on a second-hand bike that only cost about £350 new.
1
Ok thats good to know. I got the bike for free and I'm restoring it as a personal project for a bit of fun. I've already spent money on many new components, I can pickup some second hand Tiagra brakes for pretty cheap so I think I'll do that!
– Axemasta
11 hours ago
3
If OP is actually able to lock the front wheel then the current brakes are strong enough.
– Michael
5 hours ago
add a comment |
A review I read says the brake calipers are own-brand and describes them as "basic" and "average". Possibly an upgrade there would help, but you'd have to decide if it's really worth spending that much money on a second-hand bike that only cost about £350 new.
A review I read says the brake calipers are own-brand and describes them as "basic" and "average". Possibly an upgrade there would help, but you'd have to decide if it's really worth spending that much money on a second-hand bike that only cost about £350 new.
answered 11 hours ago
David RicherbyDavid Richerby
13.1k33466
13.1k33466
1
Ok thats good to know. I got the bike for free and I'm restoring it as a personal project for a bit of fun. I've already spent money on many new components, I can pickup some second hand Tiagra brakes for pretty cheap so I think I'll do that!
– Axemasta
11 hours ago
3
If OP is actually able to lock the front wheel then the current brakes are strong enough.
– Michael
5 hours ago
add a comment |
1
Ok thats good to know. I got the bike for free and I'm restoring it as a personal project for a bit of fun. I've already spent money on many new components, I can pickup some second hand Tiagra brakes for pretty cheap so I think I'll do that!
– Axemasta
11 hours ago
3
If OP is actually able to lock the front wheel then the current brakes are strong enough.
– Michael
5 hours ago
1
1
Ok thats good to know. I got the bike for free and I'm restoring it as a personal project for a bit of fun. I've already spent money on many new components, I can pickup some second hand Tiagra brakes for pretty cheap so I think I'll do that!
– Axemasta
11 hours ago
Ok thats good to know. I got the bike for free and I'm restoring it as a personal project for a bit of fun. I've already spent money on many new components, I can pickup some second hand Tiagra brakes for pretty cheap so I think I'll do that!
– Axemasta
11 hours ago
3
3
If OP is actually able to lock the front wheel then the current brakes are strong enough.
– Michael
5 hours ago
If OP is actually able to lock the front wheel then the current brakes are strong enough.
– Michael
5 hours ago
add a comment |
Axemasta is a new contributor. Be nice, and check out our Code of Conduct.
Axemasta is a new contributor. Be nice, and check out our Code of Conduct.
Axemasta is a new contributor. Be nice, and check out our Code of Conduct.
Axemasta is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Bicycles Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f60137%2fstopping-power-of-mountain-vs-road-bike%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
3
I don't understand. You say "I've currently got the brakes and rear derailleur connected", which strongly suggests that the front brakes aren't connected. That, right there, would explain your bad braking performance, since something like 70% of the braking power comes from the front wheel. But then you claim that you're locking up the front wheel while braking. Regardless of what brakes are connected, that's suspect, since a locked front wheel almost always throws you off the bike. So what's going on?
– David Richerby
11 hours ago
3
Indeed, in my experience a locked front wheel almost always requires a change of underwear :)
– Andy P
11 hours ago
6
@AndyP You shouldn't wear underwear with your cycling shorts! ;-) (Or maybe you should, since a change of underwear is much cheaper than a change of shorts.)
– David Richerby
11 hours ago
1
Have you replaced the brake rubbers? Old one may become hard and lose stopping power. Have you degreased the rims? From sitting around they may have gathered greasy dust, especially while stored in a garage.
– Carel
10 hours ago
1
Just to clarify: Are you really able to make the front wheel lock and skid on dry tarmac? Then the brakes are fine but the tires are rubbish.
– Michael
5 hours ago