Windows 98 hangs after entering password on fresh installModern USB devices on Windows 98 SEWindows 98 / XP Dual bootWindows 98 with 2GB of RAMUsing a NeoMagic 256XL with Windows 98SEWindows 98 SE installation “hangs”A fatal exception 0E has occurred at 0028:FF02847B Installing Windows 98 SEHow to use USB flash drives with Windows 98 SE?Windows 98 SE PC refusing to network using NIC/modemsWhat does “select” mean in a Windows 98 install disc?Windows 98 SE Splash Screen loads forever
Have astronauts in space suits ever taken selfies? If so, how?
Is a tag line useful on a cover?
Why are 150k or 200k jobs considered good when there are 300k+ births a month?
How do I create uniquely male characters?
Did Shadowfax go to Valinor?
Why are electrically insulating heatsinks so rare? Is it just cost?
What does "Puller Prush Person" mean?
can i play a electric guitar through a bass amp?
Why do I get two different answers for this counting problem?
Test whether all array elements are factors of a number
Theorems that impeded progress
To string or not to string
Email Account under attack (really) - anything I can do?
What are these boxed doors outside store fronts in New York?
Is it possible to do 50 km distance without any previous training?
Mathematical cryptic clues
Python: next in for loop
Font hinting is lost in Chrome-like browsers (for some languages )
How does one intimidate enemies without having the capacity for violence?
Minkowski space
How to find program name(s) of an installed package?
Today is the Center
How to format long polynomial?
Why did the Germans forbid the possession of pet pigeons in Rostov-on-Don in 1941?
Windows 98 hangs after entering password on fresh install
Modern USB devices on Windows 98 SEWindows 98 / XP Dual bootWindows 98 with 2GB of RAMUsing a NeoMagic 256XL with Windows 98SEWindows 98 SE installation “hangs”A fatal exception 0E has occurred at 0028:FF02847B Installing Windows 98 SEHow to use USB flash drives with Windows 98 SE?Windows 98 SE PC refusing to network using NIC/modemsWhat does “select” mean in a Windows 98 install disc?Windows 98 SE Splash Screen loads forever
I am doing a fresh reinstall of Windows 98 SE on a Dell Optiplex GX1 550Mbr+. I previously had this very same version of Windows on this machine. The install works perfectly, but when I get to the login screen, I hit escape (or type in the password and press enter), and it just hangs.
I have tried:
- Changing hard drives
- Changing CD drives
- Changing the RAM
- Swapping the hard drive into another machine
- Removing the password
The first 3 points result in no improvement, event if I re-install from scratch.
When I swap the hard drive into another computer, I can log in just fine, so it doesn't seem to be the installation at fault.
When I remove the password (using another computer), it just hangs at the green desktop background. The mouse will move, but nothing ever loads.
CTRL + ALT + DEL will bring up the task manager, and I can restart the computer, or kill the only process (Hidserv).
Running the computer in Safe Mode works.
windows-98
asked 5 hours ago
JonathanJonathan
1264
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
I am doing a fresh reinstall of Windows 98 SE on a Dell Optiplex GX1 550Mbr+. I previously had this very same version of Windows on this machine. The install works perfectly, but when I get to the login screen, I hit escape (or type in the password and press enter), and it just hangs.
I have tried:
- Changing hard drives
- Changing CD drives
- Changing the RAM
- Swapping the hard drive into another machine
- Removing the password
The first 3 points result in no improvement, event if I re-install from scratch.
When I swap the hard drive into another computer, I can log in just fine, so it doesn't seem to be the installation at fault.
When I remove the password (using another computer), it just hangs at the green desktop background. The mouse will move, but nothing ever loads.
CTRL + ALT + DEL will bring up the task manager, and I can restart the computer, or kill the only process (Hidserv).
Running the computer in Safe Mode works.
windows-98
asked 5 hours ago
JonathanJonathan
1264
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Does the computer have a network card and is it connected? The next thing after login is connecting to the network.
– tofro
5 hours ago
It has onboard ethernet, but it is not connected.
– Jonathan
5 hours ago
Can you try connecting it? Or disable the NIC from safe mode?
– tofro
5 hours ago
I connected it to the offline network, to no avail. The online network does not work any better. I'm going to try disabling it from safe mode now
– Jonathan
5 hours ago
Disabling the NIC (I did it right from the BIOS) does not work either - it still hangs right after where the login screen would be (I currently have it removed).
– Jonathan
5 hours ago
add a comment |
I am doing a fresh reinstall of Windows 98 SE on a Dell Optiplex GX1 550Mbr+. I previously had this very same version of Windows on this machine. The install works perfectly, but when I get to the login screen, I hit escape (or type in the password and press enter), and it just hangs.
I have tried:
- Changing hard drives
- Changing CD drives
- Changing the RAM
- Swapping the hard drive into another machine
- Removing the password
The first 3 points result in no improvement, event if I re-install from scratch.
When I swap the hard drive into another computer, I can log in just fine, so it doesn't seem to be the installation at fault.
When I remove the password (using another computer), it just hangs at the green desktop background. The mouse will move, but nothing ever loads.
CTRL + ALT + DEL will bring up the task manager, and I can restart the computer, or kill the only process (Hidserv).
Running the computer in Safe Mode works.
windows-98
asked 5 hours ago
JonathanJonathan
1264
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I am doing a fresh reinstall of Windows 98 SE on a Dell Optiplex GX1 550Mbr+. I previously had this very same version of Windows on this machine. The install works perfectly, but when I get to the login screen, I hit escape (or type in the password and press enter), and it just hangs.
I have tried:
- Changing hard drives
- Changing CD drives
- Changing the RAM
- Swapping the hard drive into another machine
- Removing the password
The first 3 points result in no improvement, event if I re-install from scratch.
When I swap the hard drive into another computer, I can log in just fine, so it doesn't seem to be the installation at fault.
When I remove the password (using another computer), it just hangs at the green desktop background. The mouse will move, but nothing ever loads.
CTRL + ALT + DEL will bring up the task manager, and I can restart the computer, or kill the only process (Hidserv).
Running the computer in Safe Mode works.
windows-98
windows-98
asked 5 hours ago
JonathanJonathan
1264
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 5 hours ago
JonathanJonathan
1264
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 5 hours ago
Jonathan
asked 5 hours ago
JonathanJonathan
1264
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 5 hours ago
JonathanJonathan
1264
asked 5 hours ago
JonathanJonathan
1264
1264
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Does the computer have a network card and is it connected? The next thing after login is connecting to the network.
– tofro
5 hours ago
It has onboard ethernet, but it is not connected.
– Jonathan
5 hours ago
Can you try connecting it? Or disable the NIC from safe mode?
– tofro
5 hours ago
I connected it to the offline network, to no avail. The online network does not work any better. I'm going to try disabling it from safe mode now
– Jonathan
5 hours ago
Disabling the NIC (I did it right from the BIOS) does not work either - it still hangs right after where the login screen would be (I currently have it removed).
– Jonathan
5 hours ago
add a comment |
Does the computer have a network card and is it connected? The next thing after login is connecting to the network.
– tofro
5 hours ago
It has onboard ethernet, but it is not connected.
– Jonathan
5 hours ago
Can you try connecting it? Or disable the NIC from safe mode?
– tofro
5 hours ago
I connected it to the offline network, to no avail. The online network does not work any better. I'm going to try disabling it from safe mode now
– Jonathan
5 hours ago
Disabling the NIC (I did it right from the BIOS) does not work either - it still hangs right after where the login screen would be (I currently have it removed).
– Jonathan
5 hours ago
Does the computer have a network card and is it connected? The next thing after login is connecting to the network.
– tofro
5 hours ago
Does the computer have a network card and is it connected? The next thing after login is connecting to the network.
– tofro
5 hours ago
It has onboard ethernet, but it is not connected.
– Jonathan
5 hours ago
It has onboard ethernet, but it is not connected.
– Jonathan
5 hours ago
Can you try connecting it? Or disable the NIC from safe mode?
– tofro
5 hours ago
Can you try connecting it? Or disable the NIC from safe mode?
– tofro
5 hours ago
I connected it to the offline network, to no avail. The online network does not work any better. I'm going to try disabling it from safe mode now
– Jonathan
5 hours ago
I connected it to the offline network, to no avail. The online network does not work any better. I'm going to try disabling it from safe mode now
– Jonathan
5 hours ago
Disabling the NIC (I did it right from the BIOS) does not work either - it still hangs right after where the login screen would be (I currently have it removed).
– Jonathan
5 hours ago
Disabling the NIC (I did it right from the BIOS) does not work either - it still hangs right after where the login screen would be (I currently have it removed).
– Jonathan
5 hours ago
add a comment |
1 Answer
1
active
oldest
votes
I found the answer! Using Safe Mode, in msconf, I disabled all the options in the startup tab except:
- Scan registry
- Task Monitor
- System Tray
That worked, so then I re-enabled the following:
- Load power profile
- Load Power Profile
- Scheduling Agent
C:WINDOWSSYSTEMmstask.exe
That was still working, so I restarted again after enabling
- Welcome
- Hidserv
Since that did work, I finally enabled the last option in msconfig:
- Scheduling agent
mstinit.exe /firstlogon
And it worked!
I tried again on another fresh install on the same computer. This time, I only disabled hidserv, and I got the same success (Windows started normally, and I was able to re-enable hidserv in msconfig). So the problem was hidserv.
answered 3 hours ago
JonathanJonathan
1264
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "648"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Jonathan is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fretrocomputing.stackexchange.com%2fquestions%2f9603%2fwindows-98-hangs-after-entering-password-on-fresh-install%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
I found the answer! Using Safe Mode, in msconf, I disabled all the options in the startup tab except:
- Scan registry
- Task Monitor
- System Tray
That worked, so then I re-enabled the following:
- Load power profile
- Load Power Profile
- Scheduling Agent
C:WINDOWSSYSTEMmstask.exe
That was still working, so I restarted again after enabling
- Welcome
- Hidserv
Since that did work, I finally enabled the last option in msconfig:
- Scheduling agent
mstinit.exe /firstlogon
And it worked!
I tried again on another fresh install on the same computer. This time, I only disabled hidserv, and I got the same success (Windows started normally, and I was able to re-enable hidserv in msconfig). So the problem was hidserv.
answered 3 hours ago
JonathanJonathan
1264
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
I found the answer! Using Safe Mode, in msconf, I disabled all the options in the startup tab except:
- Scan registry
- Task Monitor
- System Tray
That worked, so then I re-enabled the following:
- Load power profile
- Load Power Profile
- Scheduling Agent
C:WINDOWSSYSTEMmstask.exe
That was still working, so I restarted again after enabling
- Welcome
- Hidserv
Since that did work, I finally enabled the last option in msconfig:
- Scheduling agent
mstinit.exe /firstlogon
And it worked!
I tried again on another fresh install on the same computer. This time, I only disabled hidserv, and I got the same success (Windows started normally, and I was able to re-enable hidserv in msconfig). So the problem was hidserv.
answered 3 hours ago
JonathanJonathan
1264
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
I found the answer! Using Safe Mode, in msconf, I disabled all the options in the startup tab except:
- Scan registry
- Task Monitor
- System Tray
That worked, so then I re-enabled the following:
- Load power profile
- Load Power Profile
- Scheduling Agent
C:WINDOWSSYSTEMmstask.exe
That was still working, so I restarted again after enabling
- Welcome
- Hidserv
Since that did work, I finally enabled the last option in msconfig:
- Scheduling agent
mstinit.exe /firstlogon
And it worked!
I tried again on another fresh install on the same computer. This time, I only disabled hidserv, and I got the same success (Windows started normally, and I was able to re-enable hidserv in msconfig). So the problem was hidserv.
answered 3 hours ago
JonathanJonathan
1264
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I found the answer! Using Safe Mode, in msconf, I disabled all the options in the startup tab except:
- Scan registry
- Task Monitor
- System Tray
That worked, so then I re-enabled the following:
- Load power profile
- Load Power Profile
- Scheduling Agent
C:WINDOWSSYSTEMmstask.exe
That was still working, so I restarted again after enabling
- Welcome
- Hidserv
Since that did work, I finally enabled the last option in msconfig:
- Scheduling agent
mstinit.exe /firstlogon
And it worked!
I tried again on another fresh install on the same computer. This time, I only disabled hidserv, and I got the same success (Windows started normally, and I was able to re-enable hidserv in msconfig). So the problem was hidserv.
answered 3 hours ago
JonathanJonathan
1264
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered 3 hours ago
JonathanJonathan
1264
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered 3 hours ago
JonathanJonathan
1264
answered 3 hours ago
JonathanJonathan
1264
1264
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Jonathan is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
Jonathan is a new contributor. Be nice, and check out our Code of Conduct.
Jonathan is a new contributor. Be nice, and check out our Code of Conduct.
Jonathan is a new contributor. Be nice, and check out our Code of Conduct.
Jonathan is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Retrocomputing Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fretrocomputing.stackexchange.com%2fquestions%2f9603%2fwindows-98-hangs-after-entering-password-on-fresh-install%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Does the computer have a network card and is it connected? The next thing after login is connecting to the network.
– tofro
5 hours ago
It has onboard ethernet, but it is not connected.
– Jonathan
5 hours ago
Can you try connecting it? Or disable the NIC from safe mode?
– tofro
5 hours ago
I connected it to the offline network, to no avail. The online network does not work any better. I'm going to try disabling it from safe mode now
– Jonathan
5 hours ago
Disabling the NIC (I did it right from the BIOS) does not work either - it still hangs right after where the login screen would be (I currently have it removed).
– Jonathan
5 hours ago